Lexmark T620 Guia Del Usuario página 24

4
Slightly bend the stack of paper as shown and place it on the elevator tray
with the preferred print side facing down. Align the stack of paper to the
back of the drawer.
Carefully align each stack of paper as you load it to ensure a smooth edge
where the stacks meet. Do not load print material above the paper
capacity mark.
This illustration shows the correct orientation for loading paper for simplex
printing. Letterhead paper should be loaded with the printed side face
down and the page top to the front of the drawer. Do not mix weights of
paper.
For duplex printing on letterhead paper, place the printed side face up with
the page top to the rear of the drawer.
5
Close the loading door.
18
2000-Sheet Drawer User's Guide
Paper capacity
Note: If you need to return your 2000-sheet drawer, please make sure
that all paper has been removed from the unit before packing.