Attaching Stabilizer Feet - Lexmark T620 Guia Del Usuario

Attaching Stabilizer Feet

CAUTION!
1
Carefully invert the 2000-sheet drawer so the bottom faces up.
2
Remove the screws securing the rubber feet to the drawer. Save the
screws and rubber feet for use in step 5 on page 5.
If you are not using an optional printer stand, the four stabilizer
feet must be attached to the drawer.
Note: If you later choose to use the drawer with the printer
stand, you must remove the stabilizer feet and re-
attach the rubber feet.
2000-Sheet Drawer User's Guide
3