Mutsy evo Manual De Instrucciones página 15

Assembly on the frame (p)
· There are two foldable attachment
points on both sides of the frame. Make
sure that the attachment points are in a
vertical position.
· Stand at the front side of the frame.
· Hold the seat on both sides at the un-
lock buttons above the attachment
points and push the chair downwards
until you hear a click.
· Check that the seat has been attached
solidly by trying to lift it from the frame.
Assembly on the frame (the child faces
the parent) (q)
· There are two foldable attachment
points on both sides of the frame. Make
sure that the attachment points are in a
vertical position.
· Stand at the front side of the frame.
· Hold the seat on both sides at the un-
lock buttons above the attachment
points and push the chair downwards
until you hear a click.
· Check that the seat has been attached
solidly by trying to lift it from the frame.
Remove the seat
· Stand at the front side of the frame.
· Hold the seat on both sides at the unlock
buttons and pull the buttons upwards
with your fingers. The seat can vertically
be removed from the attachment points.
Fold the frame with the seat directed for-
wards
· Stand behind the frame and make sure
that the back support of the seat is
standing upright.
· Push the buttons on both sides of the
push bar and turn the push bar down-
wards until it has reached its lowest
position.
· This position is indicated by means of a
marking on the hinge point.
· Pull the unlock buttons on the inside of
the frame towards you and then push
the top part of the frame downwards.
· Pull the button at the back of the seat
upwards, hold this upwards and tilt the
back support of the seat backwards un-
til it is fully flat.
· Push the buttons on both sides of the
leg support and push the leg support
fully downwards.
Adjust the back support (r)
· Pull the button at the back of the seat
upwards and hold it upwards.
· The back support has 4 positions.
Place the back support in the desired
position and release the button to lock
the position.
Adjust the leg support (s)
· Lift the leg support to place it upwards.
· Push the buttons on both sides of the
leg support and push the leg support
downwards to lower it.
Reclined carriage position (t1,t2)
· The seat has a reclined carriage posi-
tion to make the seat suitable for chil-
dren from birth.
· ! The use of a suitable pram body is
always recommended and preferred for
children from birth up to the age that
your child can sit up unassisted.
· To put the seat in the reclined carriage
position, put the leg rest in its highest
position and the backrest of the seat
in its fully reclined position. Release
the two press studs on each side of the
seat. (t1)
· Open the zipper around the leg sup-
port. There is a fabric side support
in the pocket behind the leg support,
which you can pull out. Now you can
put the side support up and attach the
press stud on each side onto the plastic
English
15