Resumen de contenidos para Canon PIXMA MX410 Serie
Página 1
ENGLISH ESPAÑOL Canon Inkjet Office All-In-One Equipo multifunción para oficina Canon Inkjet series Getting Started Read Me First Guía de inicio Léame en primer lugar Make sure to read this manual before using the machine. Please keep it in hand for future reference.
■ Contents ■ Symbols Used in This ■ Contenido ■ Símbolos utilizados en este Document documento Prohibited actions. Acciones prohibidas. 1 Preparation P.4 1 Preparación P.4 2 Install the FINE Cartridges P.10 2 Instalación de los cartuchos FINE (FINE Cartridges) P.10 3 Load Paper P.14 Instructions including important Instrucciones que incluyen...
■ Machine Installation Flow Network Connection Conexión de red USB Connection ■ Flujo de instalación Conexión USB del equipo Wireless Connection Using from Additional Computers Conexión inalámbrica (when the machine is already connected to the network and you want to add computers from which to use the machine) Machine Preparation Uso desde ordenadores...
On-screen manuals can be viewed on a computer. They are included on the Setup CD-ROM and are installed during the software installation. Some parts of the manual may be displayed in English. For details on opening the on-screen manuals, refer to page 40. Los manuales en pantalla se pueden ver en un ordenador.
Página 5
■ Devices Required for Wireless Connection ■ Dispositivos necesarios para la conexión inalámbrica When using the machine over a wireless connection, a commercial access point or router that supports IEEE802.11n/g/b is required. Cuando utilice el equipo mediante una conexión inalámbrica, se necesita un punto de acceso o un router disponibles en comercios que sean compatibles con IEEE802.11n/g/b.
Página 6
Make sure all the following items are supplied. • Do not install the machine where an object may fall on it. In addition, do not place any object on the top of the machine. It may 1. FINE cartridges (Color, Black) 5.
Página 7
Do not connect the power cord yet. Remove all the protective materials 1. Open the Paper Output Tray (A). and orange tape from the outside of the 2. Make sure the Document Cover (B) is closed, then lift to open the Scanning Unit (Cover) (C). machine.
Página 8
Remove both the orange tape (E) and the protective material (F) 1. Lift the Scanning Unit (Cover) slightly. carefully. 2. Fold the Scanning Unit Support. 3. Close the Scanning Unit (Cover) gently. Retire la cinta naranja (E) y el material protector (F) con cuidado. 1.
Página 9
Only when connecting a telephone or an answering machine Sólo al conectar un teléfono o un contestador automático Connect one end of supplied telephone line cable (G) to Use fax features? Remove the Cap (I) (1), then connect a telephone or an answering the lower connector labeled “L”...
Página 10
Insert the power cord into the connector on the left Press the ON button (J) to turn on the Use the [ or ] button (K) on the Operation Panel to select side of the machine and into the wall outlet firmly. machine.
Página 11
When this screen is displayed, proceed to the next step. Cuando aparezca esta pantalla, continúe con el paso siguiente. When it is necessary to turn off the machine Cuando sea necesario desconectar el equipo • Before removing the power plug, make sure that all the lamps on the Operation Panel are not lit.
Página 12
1. Make sure the Document Cover (A) is closed, then lift to open the Scanning The FINE Cartridge Follow the next Unit (Cover) (D). Holder (H) moves to the procedure to insert the installation position. Black and Color 2. Fix it with the Scanning Unit Support (E). FINE Cartridges into their •...
Página 13
Open the Ink Cartridge Locking Cover on the right side. After removing the Black FINE Cartridge from its box, pull the orange protective tape (J) in the direction of the arrow and remove it carefully. Pinch (I) firmly and pull up the cover. •...
Página 14
Place the Black FINE Cartridge into the right slot Push down of the Ink Cartridge Locking Cover until it snaps into place. View the Ink Cartridge Locking Cover straight on and check that it is locked correctly (not at an angle). •...
Página 15
Insert the Color FINE 1. Lift the Scanning Unit (Cover) slightly. Wait for about 1 minute until the LCD changes as shown in the illustration, then Cartridge into the left proceed to the next step. 2. Fold the Scanning Unit Support. FINE Cartridge Holder 3.
Página 16
Open the Paper Support Move the Paper Guides Load paper in the center Slide the left and right Paper Guides against both (A). (B) to both edges. of the Rear Tray (C). edges of the paper. Make sure that the height of the paper stack does not exceed the line (D).
Página 17
Depending on your needs, select one of the following three modes for receiving Read this section only when using faxes. You can change the receive mode after installation is complete. For details, the fax features. refer to “Setting the Receive Mode” in the on-screen manual: Basic Guide. If not using the fax features, go to En función de sus necesidades, seleccione uno de estos tres modos para la “5 Select Connection Method”...
Página 18
Responses to Calls in Each Mode Respuestas a llamadas en cada modo When a fax call arrives When a voice call arrives Si recibe una llamada de fax Si recibe una llamada de voz While the telephone's ringtone While the telephone's ringtone sounds, pick up the handset.
Página 19
Press the FAX button (A), then press Use the [ or ] button (C) to select Receive mode Select a receive mode, then press the OK button. the Menu button (B). set., then press the OK button. If the advanced settings screen is displayed Select No, then press the OK button.
Intended Use Connection Method Uso previsto Método de conexión • Connect to a computer with a USB cable. USB Connection Go to “6 Set Up a USB Connection (Software • Conectar a un ordenador con un cable USB. Installation)” on page 19. Conexión USB Vaya a “6 Configuración de una conexión USB (instalación del software)”...
Página 21
Do not connect the USB cable yet. For Spanish Users in the U.S.A. Para los usuarios de habla hispana en EE. UU. Aún no conecte el cable USB. To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk.
Easy-WebPrint EX Easy-WebPrint EX If the USB cable is connected before the software is installed Si el cable USB está conectado antes de instalar el software Press the ON button (A) to TURN OFF THE MACHINE. Operating noise may continue for up to 30 seconds until the machine turns off.
Página 23
Windows 7/Windows Vista Windows XP Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. 1. Make sure that the machine has If the User Account Control dialog box reappears in following steps, click Yes or Continue. turned off.
Página 24
Click Easy Install. Click Install. Select Use the printer via USB, then click Next. The drivers, application software, and on-screen manuals are installed. Follow any on-screen instructions to proceed with the software installation. • If you want to select particular items to install, click Custom Install.
Página 25
USB Port If the Extended Survey Program screen If the serial number is not displayed on the registration screen, input the number found inside the machine. appears Puerto USB Si aparece la pantalla Extended Survey Si el número de serie no aparece en la pantalla de Program registro, introduzca el que viene en el interior del equipo.
Página 26
Solution Menu EX starts. For Macintosh For Macintosh Solution Menu EX starts when clicking OK in the Canon Solution It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first Menu EX dialog.
Before Configuring Wireless Settings Antes de configurar la conexión inalámbrica After confirming the connection, perform the following Make sure that the computer and access point or router are instructions to add (connect) the machine to the network. connected. Asegúrese de que el ordenador y del punto de acceso o del Después de confirmar la conexión, siga las instrucciones router están conectados.
Página 28
• If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network. If such a warning message appears, set the security software to always allow access.
Página 29
Easy-WebPrint EX Easy-WebPrint EX If the network setup cable is connected before the software is installed Si el cable de configuración de red está Easy-WebPrint EX is Web print software conectado antes de instalar el software that is installed on the computer when installing the supplied software.
Página 30
Windows 7/Windows Vista Windows XP Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. Click Easy Install. If the User Account Control dialog box reappears in following steps, click Yes or Continue. The drivers, application software, and on-screen manuals are installed.
Página 31
Click Install. Select Use the printer with wireless LAN When the Printer Detection screen appears, click Next. connection, then click Next. • If the Printer Connection screen appears instead of the screen above, the Follow any on-screen instructions to proceed with the connection method is not correctly selected in software installation.
Make sure that any of the lamps on the When the Set Up New When the Connect Cable screen appears, connect the machine to the computer mode buttons (A) lights, then click OK. Printer screen appears, with the network setup cable. click Next.
Página 33
□ If the Detected Access Points List or Access Points screen appears □ Si aparece la Lista de puntos de acceso detectados (Detected Access Points List) o la pantalla Puntos de acceso (Access Points) If this screen does not appear, perform on page 32.
□ If the Confirm Connection Access Point screen appears □ Si aparece la pantalla Comprobación del punto de acceso de la conexión (Confirm Connection Access Point) When the Disconnect Cable screen appears, remove When the Setup Completion screen the network setup cable, then click Next. appears, click Complete or OK.
Página 35
Windows users: go to "Information Mac OS X v.10.4.11 (1)" on page 36. • The alphanumeric characters after Canon MX410 series is the machine's Bonjour service name or MAC address. • If the machine is not detected, make sure of the following.
Página 36
Asegúrese de que se ha agregado Lista de impresoras (Printer Printers) en la ventana Navegador de en el menú desplegable, elija Canon MX410 series a la lista de List), haga clic en Añadir impresoras (Printer Browser). Canon MX410 series en la lista impresoras.
Página 37
When the Register Printer and Scanner screen Select Canon MX410 series on the Canon IJ Click Next on the Register Printer and Scanner appears, click Register Scanner. Network Scanner Selector EX screen, then click OK. screen. Next, go to "Information (1)" on page 36!
Página 38
If the Extended Survey If the serial number is not displayed on the registration screen, input the number found Program screen appears inside the machine. Si aparece la pantalla Extended Si el número de serie no aparece en la pantalla Survey Program de registro, introduzca el que viene en el interior del equipo.
Página 39
No es necesario establecer ninguna configuración adicional. For Macintosh For Macintosh Solution Menu EX starts when clicking OK in the Canon It is necessary to restart the computer before scanning Para añadir ordenadores desde los que utilizar el equipo, using the Operation Panel on the machine for the first Solution Menu EX dialog.
If the machine is already connected to a wireless connection, it can be used from additional computers on the same network. Si el equipo ya está conectado a una conexión inalámbrica, se puede utilizar desde ordenadores adicionales de la misma red. To use from additional computers Insert the Setup CD-ROM into the computer from which Computer from which the machine can be used currently...
Página 41
To change to a wireless connection from a USB connection, start over from “7 Set Up a Wireless Connection” on page 25 to set up a wireless connection. Para cambiar a una conexión inalámbrica desde una conexión USB, vuelva a empezar desde “7 Configuración de una conexión inalámbrica”...
Página 42
Various application software are installed on the computer along with the drivers. You can print creative items by correcting/enhancing photos using the application software. For details on how to use the application software and the machine, refer to the on-screen manual. Junto con los controladores, en el ordenador se instala diverso software de aplicación.
Página 43
Start Solution Menu EX from the Canon Solution Load paper in the Rear Tray (A) in portrait orientation with the printing side facing up. Menu EX icon on the desktop (Windows) or on the Dock (Macintosh), click Photo Print, then click Photo Make sure that the Paper Output Tray (B) is open.
Página 44
Click Select Paper, then select the Click Layout/Print, then select a layout Click Print. Select a folder containing images, then select an image you want to print. Paper Size and Media Type settings for the image. If you are using Windows, printing will start. that match the loaded paper.
Página 45
Load A4 or Letter-sized Open the Document Cover (B), then place 1. Close the Document Cover. plain paper. the document face-down and align it with the 2. Press the COPY button (E). Alignment Mark (C). Make sure that the Paper The copy standby screen is displayed.
Página 46
Press the FAX button (A). Open the Document Tray (C), then move the Document Guides (D) to both edges. This section explains how to send a fax in black and white from the ADF (Auto Document Feeder) (B). • For details on supported documents and settings for image quality, density (brightness), etc., refer to the on-screen manual: Basic Guide.
Página 47
Insert the document until a beep sounds, then slide the left and right Document Use the Numeric buttons (E) to enter Press the Black button (F). Guides against both ends of the document. the fax number. The fax is sent. •...
Página 48
Read this section only when setting up a wireless connection by using the WPS (Wi-Fi Protected Setup). • For details on WPS, refer to the manual of your access point. Use the Menu button (A) to select Device Use the [ or ] button (B) to settings.
Página 49
Select WLAN active/ Select Wireless LAN active, then press the OK button. Select Wireless LAN Select WPS, then press inactive, then press the setup, then press the OK the OK button. OK button. button. When wireless connection is enabled, the Wi-Fi lamp (C) lights blue. Seleccione WLAN Seleccione LAN inal.
Página 50
Select Push button Press and hold the WPS button on the access point (for about When the above screen appears, press the OK button. method, then press the 5 seconds), then press the OK button on the machine within 2 •...
5. Vaya a The machine supports “WCN-UFD”. • Canon assumes no responsibility for any damage or loss of data stored on your USB flash drive regardless of the cause even within the warranty period. Next, read “Software Installation (2)” on page •...
Página 52
Si tiene activada la función de firewall en el software de seguridad, puede aparecer un mensaje indicando que el software de Canon está intentando acceder a la red. Si aparece dicho mensaje, configure el software de seguridad para que permita siempre el acceso.
Página 53
For Spanish Users in the U.S.A. Easy-WebPrint EX Easy-WebPrint EX Para los usuarios de habla hispana en EE. UU. Make sure that any of the lamps on the mode buttons (A) lights and that the Wi-Fi lamp (B) lights blue. •...
Página 54
Windows 7/Windows Vista Windows XP Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. Turn on the computer, then insert the If the User Account Control dialog box reappears in following steps, click Yes or Continue. Setup CD-ROM into the CD-ROM drive.
Página 55
Click Easy Install. Click Install. Select Use the printer with wireless LAN connection, then click Next. The drivers, application software, and on-screen manuals are installed. Follow any on-screen instructions to proceed with the software • If you want to select particular items to install, installation.
Página 56
When the Printer Detection screen appears, click Next. Make sure that any of the lamps on the mode buttons (A) lights, then click OK. • If the Printer Connection screen appears instead of the screen above, the connection method is not correctly selected in −...
Página 57
When the Detected Printers List dialog box appears, select Canon MX410 When the Setup Completion screen appears, click Complete or OK. series, then click Next. • If the machine is not detected, Set Up New Printer dialog box is displayed. Refer to the printed manual: Network Setup Troubleshooting.
Página 58
Windows users: go to "Information Mac OS X v.10.4.11 (2)" on page 59. • The alphanumeric characters after Canon MX410 series is the machine's Bonjour service name or MAC address. • If the machine is not detected, make sure of the following.
Página 59
Mac OS X v.10.4.11 When the Printer List window Click More Printers in the Printer Select Canon IJ Network in the pop-up Make sure that Canon MX410 series appears, click Add. Browser window. menu, select Canon MX410 series in is added to the list of printers.
Página 60
When the Register Printer and Scanner screen Select Canon MX410 series on the Click Next on the Register Printer and Scanner appears, click Register Scanner. Canon IJ Network Scanner Selector screen. EX screen, then click OK. Next, go to "Information (2)" on page 59!
Página 61
If the serial number is not displayed on the registration screen, input the number found inside the machine. Si el número de serie no aparece en la pantalla de registro, introduzca el que viene en el interior del equipo. Serial No. * * * * * * * * * Click Next.
Página 62
Solution Menu EX starts. For Macintosh For Macintosh Solution Menu EX starts when clicking OK in the Canon It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first Solution Menu EX dialog.
Página 63
Using the Machine from Additional Computers Now that the machine is setup on your wireless connection, you can install the software and drivers on additional computers on the same network. Additional settings are not required. To add computers from which to use the machine, go to "8 Use from Additional Computers" on page 38. Uso del equipo desde ordenadores adicionales Una vez finalizado el proceso de instalación de la conexión inalámbrica del equipo, se puede instalar el software y los controladores en ordenadores adicionales de la misma red.
Página 64
After a period of use, the inside of the machine may become stained with ink. To avoid staining your hands or clothes with ink, it is recommended that you clean the Ink Cartridge Locking Cover (A) and the inside of the tray (B) with a facial tissue or the like as required.
Página 65
(Based on ITU-T No.1 chart for US specifications and Canon FAX Since the Hi-Speed USB interface is fully upwardly compatible with Standard chart No.1 for others, both in standard mode or Canon FAX Scanning resolution USB 1.1, it can be used at USB 1.1.
Página 66
Velocidad de transferencia (valor estándar): Suministro eléctrico • Windows: Uninstall software bundled with the Canon inkjet printer IEEE802.11n: máx. 150 Mbps before upgrading from Windows Vista to Windows 7, then, install the 100 a 240 V de CA, 50/60 Hz IEEE802.11g: máx.
(Basado en el cuadro nº 1 de ITU-T para especificaciones de EE UU y SVGA 800 x 600 XGA 1024 x 768 en el cuadro nº 1 del estándar de FAX de Canon para el resto, ambos en modo estándar). •...
CL-211 2976B001 CL-211 2976B001 Call 1-800-OK-CANON to locate a dealer near you, or visit the Canon Llame a 1-800-OK-CANON para localizar un distribuidor cercano o visite online store at www.shop.usa.canon.com la tienda en línea Canon en www.shop.usa.canon.com CANON U.S.A. INC.