CARE OF THE EXTERIOR
spa's surface. A soft rag should easily remove most dirt. Stains and dirt generally will
not adhere to your spa's surface. Most household chemicals are harmful to your
spa's shell. Cleaning of the surface should only be done with a non-abrasive, non-
sudsing cleaner. Always thoroughly rinse off any spa shell cleaning agent with fresh
water. The use of a spa polish is recommended after the spa shell has been dried, to
polish the surface.
SERVICE NOTES:
dealer can recommend a stain and scale inhibitor to use if your spa water has a high
concentration of dissolved minerals.
2. The use of alcohol or any household cleaners other than those listed to clean the spa
under the warranty.
cleaners out of the reach of children and use care when applying.
SPA PANNEL
or solid - alcohol, acids for domestic use, acetone or other solvents, which damage
surfaces.
WOOD FINISH : l
absolute colour consistency between one production batch and another. Therefore a
slight difference in colour between two series of panels cannot be considered a defect.
diluted in water: rinse the surface and dry it after cleaning.
A
:
VOID
liquid detergents containing abrasives, alcohol, household use acids, acetone,
trichloroethylene or other solvents as they corrode the surface.
– essential oils and bath salts.
IMPORTANT:
time goes on a progressive change in the appearance of the surface is natural and not
a defect. Heat and humidity especially interact with light speeding up aging.
7
EN