Glass 1989 SPA Manual De Uso página 71

interface that can both be selected in
the main screen proposed by the control
panel.
SPA MODE
Esci Pompa 1 Pompa 2
The SPA mode proposes an icon menu
with which it is possible to enter the direct
control of minipool functions by brwosing
among the available ones.
it indicates the pump operating state but
no action can be carried out.
through the direction keys, highlight
the funciton where the action is to be
performed, the edges of the icon itself
become white as well as the colour of
the text that describes it, then press the
"OK" key.
QUICK MENU/ DIRECT ACCESS MODE:
The quick menu mode changes the access
modality to functions by proposing a direct
access to main functions available on the
minipool in a steady manner and confering
a precise functionality to each key situated
on the right side of the display.
Menù rapido
Pompa 1
Pompa 2
Esci
Such function, which apparently duplicates
the keypad on the display left side in
electronic manner, is very useful when
you decide to invert the display and the
message visualization.
In this way, from the inside and the outside
Luce
Luce
of the minipool, an easy and intuitive
operating mode can be activated; function
can be started without navigation, some
of them are inside the menu.
To return to main menu select the "BACK"
key with the cursors.
STARTING OF SPA PUMPS
can be installed.
The spe pump can be started in different
ways obtaining the same result.
Direct access to keys on the left hand
side of the display: Start/stop the
selected pump through the corrisponding
key.
SPA mode: Enter the spa menu, then
select the chosen pump and start/stop
through the "OK" key.
Quick menu mode: Enter the quick
menu mode, then start/ stop the required
function with keys on the left of the display,
whose functions are described on display,
according to minipool model.
LIGHT
It is usually possible to enter the control
"Light" by selecting it on the keypad on the
left side of the display when the function
is listed, or through the string SPA of
main menu by selecting the icon "Light",
otherwise it can be entered through the
quick menu string of main menu.
By selecting the "Light" key or the
corresponding icon followed by the"OK"
key, the lighting device function is enabled.
In the colour selecting mode, for each
combination of colours is proposed.
"SCENES" MODE
This function permits to set operating
modes that can be personalized by
the user according to his preferences
for massages combined to customized
scenes.
Enter spa, blower and chromotherapy
functions from the menu or directly from
the keys.
Select the desided configuration to
23
EN