Glass 1989 SPA Manual De Uso página 73

select the string "Time of day", then move
to the values to modify with right/left keys
and select with up and down arrows.
Ora/minuti
10:05 :05 PM 12 h
Salva
Cancella
Choose to visualize the time in 15:35 or
3:35 PM format by selecting the 24 h or
12 h value.
modifications/adjustments, select the
"Cancel" icon to exit without saving
F I LT E R C Y C L E S - f i l t e r c y c l e s
management
The contol electronics of minipool is
(every day at the same hour) and duration.
for at least 1.5 hours one a day and to
increase such value depending on how
heavily it is used.
Filtrazione
Filtrazione 1
Esci
Inizia a 12:00 AM
Funziona 0 HR 0 Min
Finisce a 12:00 AM
Filtrazione 2 NO
Inizia a 12:00 AM
Funziona 0 HR 0 Min
Finisce a 12:00 AM
Filtrazione
Filtrazione 1
Salva
Inizia a 6:15 AM
Funziona 3 HR 0 Min
Finisce a 12:00 AM
Filtrazione 2 NO
Cancella
Inizia a 12:00 AM
Funziona 0 HR 0 Min
Finisce a 12:00 AM
Move within the menu to set the required
function values through right and left keys.
It is especially required to decide:
automatically calculates the filtering
stopping time);
(if activated);
At the end of settings, browse until
"Cancel" icons with the direction keys to
the "Save" icon to save them.
cycle both spa pumps could activate.
INVERT PANEL – Visualization inversion
of the control panel
By selecting the "Invert Panel" string
possible to change the visualizaton way
and the direction key meaning to make
easier the use of the control panel from
inside or outside of the minipool.
LOCK - Control panel access limits
By selecting the "Lock" string and
OK" key it is possible
to enter a submenu showing "Settings"
and "Panel".
Chiuso
Settaggi Spento
Esci
Pannello Spento
By selecting the "Settings" string and
"Access" a partial limit mode of the control
panel access is enabled.
This function allows the user to enter and
use the spa and light functions freely but
does not permit to change the minipool
operating settings.
It avoids that the operating and setting
parameters are tampered.
The total lock of the control panel
functioning is obtained by selecting the
"Panel" string.
25
EN
OK" key it is