LG UU42W Manual De Instalación página 16

Wiring Connection
2. Floor Standing type
Procedure for Connecting the Cable to Indoor Unit, is as follows:
1. Open The Front Door Manually, as shown in Fig. 1.
2. Open the Control Box Cover (A) with Driver, (
3. Connect the Cables (LG doesn't supply) to the terminal Block of Indoor Unit, as shown in
Fig. 3.
4. Install a power supply line or connecting cables as the Fig. 4 in order to prevent the
connecting wires from being cut by sharp edge of the hole.
5. Secure the Control Box Cover (A) to its original position with the help of Driver(
6. Close the Front Door.
(Fig.1)
(Fig.3)
(Fig.4)
16 Air Conditioner
) as shown in Fig. 2.
(Fig.2)
1(L1) 2(L2) 3
Outdoor unit
).
A
Cap(Remove)