Installation Notes - Tripp-Lite SRCOOL2KWM Manual Del Propietário

Accessories
Warning: After removing the unit from the shipping container, check for damage or missing parts (refer to the parts list below).
If you notice a problem, visit www.tripplite.com/support for service. Do not attempt to operate a damaged unit.
Accessory Parts List:
Adjustable Exhaust Panel
(2 Sections)
M4x10mm (8)
Installation
The procedures described in this section are for Tripp Lite wall-mount rack enclosure types and may not be appropriate for all applications. The
user must determine the fitness of hardware and procedures before mounting. If hardware and procedures are not suitable for your application,
contact Tripp Lite for assistance.

Installation Notes

• The SRCOOL2KWM is ideal for enclosures with perforated doors (not for use in enclosures with solid/acrylic glass/glass doors).
• If your building's cooling system has night or weekend thermostat setbacks, has periodic shutdowns, or has limited cooling
capacity, you may need to consider alternatives to the standard installation. This product is meant to be used as a supplemental
cooling device, and cannot make up for significant fluctuations in building temperature or humidity.
Front Door Facing Installation
1
Attach the two brackets using the supplied
M4 x 10 mm screws.
1
Exhaust Duct Adapter
Self-Tapping Screw (4) Magnetic Door Panel (1)
2
With the unit facing forward, place it on
top of a wall-mount rack. Align the bracket
holes with the mounting holes on top of
the wall-mount rack.
Note: Bracket holes will align with a Tripp Lite
rack. Other rack brands may require new holes
to be drilled into them.
2
M6x16mm (4)
Exhaust Duct
3
3
4
Directional Vent
Extra Drainage Plug
Secure unit to wall-mount rack with the
supplied M6 x 16 mm screws.
Note: If mounting to a rack brand other than
Tripp Lite, user must supply the mounting
hardware.