Automatic Programming - Steren RM-110 Manual De Instrucciones

2. PROGRAMMING
2.2 Semi-manual programming
1. Manually turn on the component (TV, DVD, etc.).
2 Press and hold the button on the unit (TV, DVD, etc.) which you want to program until the
indicator on the button is activated.
3. Aim the remote control directly to the device and repeatedly press CH + until it turns off.
If desired, press and hold CH + for a quick search. If you
accidentally press the CH + button, simply press CH - to return.
4. When the equipment is controlled via the remote control, press the OK key to fi nish and
record the code in the memory.
If equipment cannot be controlled after successfully programming sequences, perform the
programming manually.

2.3 Automatic programming

1. Manually turn on the component (TV, DVD, etc.).
2. Press and hold the button on the unit (TV, DVD, etc.) which you want to program until the
indicator on the button is activated.
3. Aim the remote control directly to the device and press the on/
off button. When the LED starts fl ashing, the control will be in
search mode. After a while, the component must turn off.
4. When the equipment is turned off, immediately press OK to
fi nish and record the code in the memory of the control. The
LED will turn off.
CBL
y
0
CBL
y
CBL
0
LRN
Family Favorite
CBL
5