Automatic Programming - Steren RM-25 Manual De Instrucciones

3.2 Automatic programming

It possible to find programming code in an automatic way to control desired component.
To exit the automatic search key TV EXIT.
1. - Turn manually the desired device on (SAT, DVD, VCR, AUX or TV).
Aim the remote control directly to your device and press ▲.
The RM-25 is in search mode when the LED flashes, the
device will turn off in this process.
If the device doesn´t turn off, press ▲ until deactivate your
SAT, DVD, VCR, AUX or TV
8
2.- Press and hold at the same time the key of the component
that you want to set, and at the same time press the key ON /
OFF until the LED turns red.
4.- Now press and release the key ◄ until turn the device on.
5 .- When the device turn on, immediately press the central key O
to set the code in the remote control (the LED shut off).