Technical data
Rated / max voltage
Li-Ion battery
Charging voltage
Charging duration
Tying tool weight
Battery weight
Total weight
Reel weight w/ 110 m twist tie
Maximum tying diameter
Amount of tying operations per battery
Amount of tying operations per reel
Amount of tying operations per minute
Tying modes
Operating temperature
•
Switched on display (8): Indicates that the tool is working and is powered by the battery.
Symbols and warnings
General warning
Compulsory Use & Main-
tenance Manual
Compulsory head protection
Tool starting
•
Plug the battery (14) into its seat inside the tool housing.
•
The tying tool is supplied with an assembled tie reel. For the following replacements read next paragraph.
•
Switch on the tool by means of the ON-OFF button (7). The display (8) lights up after a beep.
•
To select the amount of tie twists press the button (9). The display (8) will show the selected tie quantity.
•
The tool is ready to be used
WARNING!
Do not use the regulations from L4 (6 twists) to L6 (8 twists) for branches with a diameter over 20 mm, because
the tie could break.
Use and maintenance manual – Translation of
original Instruction.: 00, Date 23/09/2020
14,4 V / 16,8 V
2,5 Ah
AC110V-220V
1,5 - 2 h each battery
780 g
231 g
1011 g
200 g
Ø 25 mm
over 10,000
785
80
6 regulations
-10° C/ +65° C
L1= 3 twists
L2= 4 twists
L3= 5 twists
L4= 6 twists
L5= 7 twists
L6= 8 twists
Warning devices
Compulsory adequate clothing
Compulsory hand protection
Compulsory feet protection
Battery charge percentage
Partial quantity of tying operations starting
from the tool switching-on. When switching
it on, the total quantity of tying operations is
shown for a short while.
Page 25