asalvo boop BASE ISOFIX GRUPO 0 + TRIO GENIUS Guia Del Usuario página 11

INSTALL AND DISMANTLE THE ISOFIX BASE AND BASKET
4
This child seat must be installed rearward facing.Here is the way to install and
dismantle the basket and base.
1.Installation:Click the two axis below the basktet into locking hook of base and
the latching indication of basket and base will show green.(Picture1)
2.Dismantling:Push the seat locking button,and the latching indication of
basket and base will show red
The latching
indication of basket
and base shows
green
ISOFIX ANCHORAGES WITH SUPPORT LEG
4
Step 1:Install ISOFIX interface
to the car seat.(see 4.7)Make
sure that the ISOFIX latching
indication
.Next,you can push the child seat
towards the car seat backrest
until it is firmly pressed against
the car seat backrest. Then
adjust the support leg to touch
the ground completely (see 4.6) .
shows GREEN
11
EN