Audio Menu - Dell 1100MP Manual Del Usuario

EM- UTO EYSTONE
S A K
on the remote control, the Auto Keystone will do once.
SPECT ATIO —Select an aspect ratio to adjust how the image appears.
A R
• 1:1 — The input source displays without scaling.
Use 1:1 apect ratio if you are using one of the following:
– VGA cable and the the computer has a resolution less than XGA (1024 x 768)
– Component cable (576p/480i/480p)
– S-Video cable
– Composite cable
• 16:9 — The input source scales to fit the width of the screen.
• 4:3 — The input source scales to fit the screen.
Use 16:9 or 4:3 if you are using one of the following:
– Computer resolution greater than XGA
– Component cable (1080i or 720p)
—Select a mode to optimize the display image based on how the
IDEO ODE
V M
projector is being used: Movie, PC, sRGB (provides more accurate color
representation), and User (set your preferred settings). If you adjust the settings
for White Intensity or Degamma, the projector automatically switches to User.
—Select 0 to maximize the color reproduction and 10 to maximize
HITE NTENSITY
W I
the brightness.
—Adjust between 1 and 6 to change the color performance of the display.
EGAMMA
D
The default setting is 0.

Audio Menu

—Press the button on the control panel or the Menu button
V
panel or the - button on the remote control to
decrease the volume and press the
the control panel or the + button on the remote
control to increase the volume.
M
OLUME —Press the
—Allows to mute the volume.
UTE
Using Your Projector
button on the control
button on
19