Language Menu; Factory Reset Menu; Computer Image Menu - Dell 1100MP Manual Del Usuario

Language Menu

Factory Reset Menu

Computer Image Menu

NOTE:
This menu is only available connected to a computer.
NOTE:
Adjust the Frequency first and then the Tracking.
Press the or
panel or the or
control to select the preferred language for
the OSD.
Presss the on the control panel or the
Menu button on the remote control to
confirm the language selection.
Select Yes to reset the projector to its
factory default settings. Reset items
include both computer image and video
image settings.
—Change the display data clock
REQUENCY
F
frequency to match the frequency of your
computer graphics card. If you see a vertical
flickering bar, use Frequency control to
minimize the bars. This is a coarse adjustment.
RACKING —Synchronize the phase of the
T
display signal with the graphics card. If you
experience an unstable or flickering image, use
the Tracking to correct it. This is a fine
adjustment.
button on the control
button on the remote
Using Your Projector
21