Técnicas De Programación De Piezas - ESAB M3 Plasma Manual Del Operario

APARTADO 2
Part Programming Techniques
2.9.5 Técnicas de programación de piezas
Aunque hay varias técnicas para programar los orificios pequeños (diámetro de 1,5 x grosor de placas e inferior),
Although there are several techniques to programming small holes (diameter of 1.5 x
revisaremos dos técnicas en profundidad.
plate thickness and lower), we will look at two techniques in depth.
ESAB controllers can be set up to utilize special codes to achieve very good plasma cut
holes. The ESAB Vison5X controllers also have variables and timers that will
dramatically affect the quality of the hole. Set properly, they can enhance the quality and
if set incorrectly, can deteriorate the hole quality. Here is a list of the aforementioned
variables and timers:
CNC VISION 50P CON CAJA DE INTERFAZ
49
D
h
a
m
p
m
¶
L
h
p
N
o
h
A
c
tu
ti
a
p
to
o
o