Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4. Standard delivery content
Standard delivery of a mobifor™ anchor point consists
GB
of the following components:
• 24 concrete blocks of 25 kg each (fig. 1, rep. 1).
• 4 block carrying arms in galvanised steel (fig. 1,
rep. 2).
• A central structure in galvanised steel (fig. 1,
rep. 3).
• A freely rotating shock absorber fixed onto the
central structure (fig. 1, rep. 4).
5.1. General features
The sizes given in the table below are referenced in fig. 2.
620
D: Weight of device
So: Circumscribed surface (Fig. 2)
Sg: Clearance surface (Fig. 2)
5.2. Characteristics of the component parts
The sizes given in the table below are referenced in fig. 3.
For all the parts we have:
D: Weight
D: Fixation diameter
Th: Thickness
L1: Length
L2: Width
H: Height
Sm: Installation surface of the 22 kg weight
Sp: Placing surface of the central structure on the ground
• Concrete block (Fig. 1, rep. 1)
25
Material: Reinforced concrete charged at a density of 3.8 kg / l.
• Block bearing arm (Fig. 1, rep. 2)
3.7
Material: Galvanised steel.
• Central structure (Fig. 1, rep. 3)
8.7
Material: Galvanised steel.
8
5. Technical Specifications
490
222
35
642
523
• Anchor point (fig. 1, rep. 5).
• Absorber rotation axis. (Fig. 1, rep. 6).
• Anchor point identification label (fig. 1, rep. 7).
A plastic bag containing:
• A label indicating the date of the next periodic
examination (Fig. 1, rep. 9).
• This installation, operating and maintenance
manual
• An information plate (Fig. 1, rep. 8).
So (m²)
Sg (m²)
162
6.4
90
0.028
83
8
Th (mm)
104
4
Publicidad
Tabla de contenido
