NGM Elite Manual Usuario página 16

Inserting the battery
Your device is provided with a lithium-ion battery and is
designed to be used exclusively with original NGM batteries and
chargers. The battery must be inserted into the backside of the
phone. Align the battery contacts with the phone contacts
inside the battery tray, and let it slide down into position. Once
the battery is inserted, close the rear cover by gently pushing it
back into position.
Charging the battery
Please charge the battery completely before starting to use the
device. First, insert the charger into the wall socket, then
connect the USB cable with the phone; use the provided USB
cable to connect one end to the provided wall socket adaptor
and the other end to the USB connector placed on the lower
side of the phone. You can also connect the phone to a PC in
order to charge it.
Warning: Never connect the phone to a computer powering on
or off to avoid voltage jumps.
While the battery is charging, an animated icon on the screen
will show the charging progress. Once the progress bar is full,
the phone can be disconnected from the charger.
Note: Use only the provided USB cable for recharging the device.
Always charge the battery indoors in a dry and safe environment. A
slight warming up during the charging process is normal. The battery
will not reach its full capacity until cycled several times.
Warning: Charging the mobile phone by improper means can cause
damage. To preserve warranty, always use original NGM chargers.
Batteries should not be disposed of as domestic garbage. Please
follow your local disposal rules.
Micro USB