H
Wechselrichter in Betrieb nehmen | Commissioning the Inverter | Θέση σε λειτουργία του μετατροπέα |
Puesta en marcha del inversor | Mise en service de l'onduleur | Messa in servizio dell'inverter | Uvedení
střídače do provozu | Idriftsættelse af omformeren | Omvormer in bedrijf stellen | Uruchamianie falownika |
Colocar o inversor em funcionamento
I
System-Daten | System-Data | Στοιχεία συστήματος | Datos del sistema | Données du système | Dati del
sistema | Systémové údaje | System-data | Systeemgegevens | Dane techniczne | Dados do sistema
Topology
Overvoltage category in accordance with IEC 60664-1
Protection class in accordance with IEC 61140
All-pole sensitive residual-current monitoring unit
Maximum permissible value for relative humidity, non-condensing
Extended humidity range according to IEC 60721-3-4
Pollution degree inside the enclosure
Pollution degree outside the enclosure
Local requirements
28
* ESS = optional
transformerless
II (DC), III (AC)
integrated
100 %
0 % ... 100 %
NRS 97-2-1: This standard requires a separate
label attached to the AC distribution board, which
indicates the AC-side disconnection of the inverter
in case of a grid failure (for further details, see
NRS 97-2-1, Sect. 4.2.7.1 and 4.2.7.2)
I
2
3
SB3-5TL-21-IS-xx-11