Product Features - Bosch GLM 50 C Professional Manual Original

OBJ_BUCH-2450-006.book Page 31 Monday, December 18, 2017 12:17 PM
A) For measurements from the front edge of the measuring tool, applies to high reflectivity of the tar-
get (e.g. a white-painted wall), weak backlighting and 25 ° C operating temperature. In addition, a
deviation of ± 0.05mm/m must be taken into account.
B) For measurements from the rear measuring tool edge, applies to high reflectivity of the target
(e.g. white cardboard), strong backlighting and – 10 ° C to +45 ° C operating temperature. In addi-
tion, a deviation influence of ±0.15 mm/m must be taken into account.
C) After user calibration at 0 ° and 90 ° ; An additional grade error of ±0.01 ° /degree to 45 ° (max.)
has to be taken into account. The left-hand side of the measuring tool serves as the reference level
for grade measurement.
D) At 25 ° C operating temperature
E) In the continuous measurement function, the maximum operating temperature is +40 ° C.
F) except battery compartment
G) For Bluetooth® low energy devices, establishing a connection may not be possible, depending on
model and operating system. Bluetooth® devices must support the SPP profile.
H) Bluetooth® deactivated
The measuring tool can be clearly identified with the serial number 11 on the type plate.

Product Features

The numbering of the product features shown refers to the illustration of the measur-
ing tool on the graphic page.
1 Display
2 Measuring button[ ]
3 Plus button[+]
4 Button for selection of the reference level
5 On/Off button[ ]
6 Bluetooth® button
7 Function button[Func]
8 Minus button[–]
9 Battery lid
10 Latch of battery lid
11 Serial number
12 Laser warning label
13 1/4"- Tripod socket
14 Reception lens
15 Laser beam outlet
16 Protective pouch
17 Laser target plate*
Bosch Power Tools
English | 31
1 609 92A 48U | (18.12.17)