Inserting/Replacing The Batteries - Bosch GLM 50 C Professional Manual Original

OBJ_BUCH-2450-006.book Page 32 Monday, December 18, 2017 12:17 PM
32 | English
18 Laser viewing glasses*
19 Tripod*
*The accessories illustrated or described are not included as standard delivery.
Display Elements (selection)
a Status Bluetooth®
Bluetooth® activated, no connection established
Bluetooth® activated, connection established
b Measurement reference level
c Battery indicator
d Measured-value lines
e Result line
f Measuring functions
g Display tilt angle
h Status bar
i Basic configurations
Assembly

Inserting/Replacing the Batteries

Using alkali-manganese or rechargeable batteries is recommended for operation of
the measuring tool.
With 1.2-V-rechargeable batteries fewer measurements could be possible than with
1.5-V-batteries.
To open the battery lid 9, press the latch 10 and remove the battery lid. Insert the bat-
teries/rechargeable batteries. When inserting, pay attention to the correct polarity
according to the representation on the inside of the battery compartment.
When the empty battery symbol appears on the display, then approx. 100 measure-
ments are still possible. When the battery symbol is empty and flashes red, no further
measurements are possible. Change the batteries or rechargeable batteries.
Always replace all batteries/rechargeable batteries at the same time. Do not use dif-
ferent brands or types of batteries/rechargeable batteries together.
Remove the batteries/rechargeable batteries from the measuring tool when
not using it for longer periods. When storing for longer periods, the batteries/re-
chargeable batteries can corrode and self-discharge.
1 609 92A 48U | (18.12.17) Bosch Power Tools