Memory Functions; Adding/Subtracting Values - Bosch GLM 50 C Professional Manual Original

OBJ_BUCH-2450-006.book Page 39 Monday, December 18, 2017 12:17 PM
The digital spirit level is used to check the horizontal or vertical align-
ment of an object (e.g. washing machine, refrigerator, etc.).
W hen the inclination 3° exceeds, the ball in the display lights red.
1°2°3°
G radient measurement is used to measure a slope or incline (e.g. of
stairs, railings, when fitting furniture, laying pipes, etc.).
The left-hand side of the measuring tool serves as the reference level for
grade measurement. If the display flashes during measurement, the
measuring tool has been tipped too heavily to the side.

Memory Functions

The value or end result of each completed measurement is automatically saved.
Memory Value Display
Maximum 30 values (measured values or end results) can be retrieved.
Select the memory function .
The number of the memory value is shown at the top of the display, the
4
corresponding memory value is shown at the bottom and the corre-
6.350 m
sponding measuring function is shown on the left.
7.620 m
Press button 3 [+] to browse forwards through the saved values.
8.890 m
430.16 m
3
Press button 8 [–] to browse backwards through the saved values.
If there is no value available in the memory, "0.000" is shown at the bottom of the dis-
play and "0" at the top.
The oldest value is located in position 1 in the memory, while the newest value is in
position 30 (when 30 memory values are available). When a further value is saved,
the oldest value in the memory is always deleted.
Deleting the Memory
To delete the content of the memory, press button 7 [Func] and select the memory
function . Then briefly press the On/Off button 5 [
value.
Simultaneously pressing the button 4 and the On/Off button 5 [
stored in the memory.

Adding/Subtracting Values

Measured values or end results can be added or subtracted.
Bosch Power Tools
English | 39
] to delete the displayed
] deletes all values
1 609 92A 48U | (18.12.17)