Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.6
Final installation
You have successfully completed all your installation tests. You can now carry out the final
installation of your immersion detector.
Bring your immersion detector to "off mode" (look up item 4.6) so that it can be handled freely
1
during its final installation.
2
Remove the weight from the cover.
4
Remove the cover.
6
Remove the 4 pieces of stabilizing foam.
8
Mark the 4 holes to be drilled.
3
Unscrew the 4 screws.
5
Remove the device and the booster from the
coping.
7
Reposition the device on the
coping.
9
Mark the water level on the tube of your
device.
11
5 mm mini
Publicidad
Tabla de contenido
