Connecting; Assemble The Speakers - Pioneer BCS-FS111 Manual De Instrucciones

Assemble the speakers

Preparing the speakers
1. Attach the non-skid pads to the base of each
speaker.
For front speakers:
Use the supplied adhesive to attach four small
pads to the base (bottom) of each speaker.
For subwoofer:
Use the supplied adhesive to attach four large
pads to the base of subwoofer.
small non-skid pads
Large non-skid pads
2. Connect the wires to the player.
Connect the white wire with gray line into (+)
side and the other wire into (–) side. To connect
the cable to the player, press each plastic inger
pad to open the connection terminal. Insert the
wire and release the inger pad.
Orange (+)
>
Caution
y Do not connect any speakers other than
those supplied to this system.
y Do not connect the supplied speakers to
any ampliier other than the one supplied
with this system. Connection to any other
ampliier may result in malfunction or ire.
y Please connect the speaker cable of
subwoofer (purple) to orange of the player.
y These speaker terminals carry HAZARDOUS
LIVE voltage. To prevent the risk of electric
shock when connecting or disconnecting
the speaker cables, disconnect the power
cord before touching any uninsulated parts.

Connecting

15
Red (+)
White (+)
Black (–)
2