Connections; Connecting Antennas; Using External Antennas; Plugging In - Pioneer X-SMC02 Manual De Instrucciones

03

Connections

Chapter 3:
Connections
CAUTION
• Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
• Connect the power cord after all the connections
between devices have been completed.

Connecting antennas

• Connect the FM (DAB/FM) wire antenna as shown
below.
• To improve reception and sound quality, connect
external antennas (see Using external antennas).
1 Connect the FM (DAB/FM) wire antenna into
the FM (DAB/FM) antenna socket.
For best results, extend the FM (DAB/FM) antenna fully and
fix to a wall or door frame. Don't drape loosely or leave coiled
up.
8
En
1

Using external antennas

To improve FM reception
Use a PAL connector (not supplied) to connect an external
FM (DAB/FM) antenna.
One-touch PAL
connector
75 Ω coaxial
cable

Plugging in

Before making or changing the connections, switch off the
power and disconnect the power cord from the AC outlet.
After you've finished making all connections, plug the unit
into an AC outlet.
This unit's rear panel
To AC outlet
Power cord