Connections; Connecting The Fm Antenna; Connecting Optional Bluetooth® Adapter (Optional); Connecting Usb Storage Devices - Pioneer X-SMC3-K Manual De Instrucciones

Connections

Chapter 2:
Connections
• Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
• Connect the power cord after all the connections
between devices have been completed.

Connecting the FM antenna

Connect the FM antenna plug onto the center pin of the FM
1
antenna socket.
FM wire antenna (supplied)
This unit's rear panel
Connecting optional Bluetooth
(optional)
®
Connect the Bluetooth adapter (Pioneer Model No.
AS-BT200) to AS-BT200 terminal on the rear panel.
• Open the AS-BT200 terminal's cover and connect the
®
Bluetooth adapter with the label side facing to the right,
then close the cover.
®
Bluetooth adapter
(commercially available)
Cover
This unit's
rear panel
Note
1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.
2 • Some iPod allow the TV output setting to be changed while connected.
• When the iPod/iPhone is disconnected from this unit, the iPod/iPhone's TV output setting returns to its original state.
ANTENNA
LAN VIDEO DC IN
FM75
(10/100) OUT 19 V
®
adapter

Connecting USB storage devices

This unit's front panel
USB storage device
(commercially available)

Connecting your TV

To watch iPod/iPhone images on a television, connect it using
a composite video cable.
• When an iPod/iPhone is connected to this unit, the TV
output setting of the iPod/iPhone is automatically set to
2
'ON'.
This unit's rear panel
(commercially available)
TV
ANTENNA
LAN VIDEO DC IN
FM75
(10/100) OUT 19 V
Video cable
Yellow
To video input
terminals
02
7
En