IMPORTANT
This manual contains basic information on the safety measures to be adopted during installation and start up. The fitter
and the user must therefore read the instructions before installation and start up.
1. GENERAL SAFETY INSTRUCTIONS
These symbols (
instructions are not followed.
DANGER. Risk of electrocution.
Failure to abide by these instructions may lead to the risk of electrocution
DANGER.
Failure to abide by these instructions may lead to the risk of injury or damage
WARNING.
Failure to abide by these instructions may lead to the risk of damage to the pump or
installation.
2. GENERAL SAFETY REGULATIONS
GENERAL
The machines indicated in this Manual are especially designed for the pre filtering and
recirculation of water in swimming pools.
They are designed to work with clean water at temperatures not exceeding 35°C.
Install them in line with the specific instructions for each installation.
Respect current regulations regarding accident prevention.
All modifications to the pump require prior authorisation from the manufacturer.
Original spare parts and accessories authorised by the manufacturer ensure greater
safety. The pump manufacturer is exempt from all liability regarding any damage caused
by unauthorised spare parts or accessories.
When working on each machine or on the units linked to them, disconnect the unit from
the power supply and the start up devices, as the electrical parts of the pump are live
during operation.
All assembly and maintenance work must be carried out by qualified and authorised
personnel who have carefully read the installation and service instructions.
To guarantee safety when operating the machine, you must comply with that set out in
that installation and service instructions.
In the event of defective operation or faults, contact your supplier or nearest
representative.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Installation and General Maintenance Manual – Viron P300 Pool Pump
) indicate the possibility of danger where the corresponding
.
.
2