Astralpool VIRON P300 Manual De Instalación Y Mantenimiento página 6

For 230 V, use a H07 RN F3 type connection sleeve with a cable section that adapts to
the power of the motor and length f the cable.
For AC, use a H07 RN F3 type connection sleeve with a cable section that adapts to the
power of the motor and the length of the cable.
The mains cable must only be connected by skilled, authorised personnel.
Before connecting the motor, check the type of fuse required.
Check the correct layout and connection of the earthing cable in the equipment.
Respect the electrical installation and connection conditions. Failure to do so may lead
to the pump manufacturer declining all responsibility and rendering the guarantee null
and void.
The motors are subject to the EEC standards with the IPX5 protection.
Special regulations may exist for the installation.
Unsuitable mains connections involve the risk of death.
A means of disconnection must be incorporated in fixed wiring in accordance with wiring
rules. The disconnect device should have a contact separation in all poles that provide
full disconnection under category III conditions.
This appliance must be installed by a qualified service technical. When installing the appliance
ensure all parts are installed in the correct zone in accordance with the wiring rules. In particular
refer to EN 60364 (EU).
Fig. 1
A N C H O R D E TA IL / D E TA IL D E L'A N C R A G E
D E TA LLE A N C LA JE / D E TTA G LIO A N C O R A G G IO
V E R A N K E R UN G / D E TA LH E D E FIX A C A O
Fig. 2
Installation and General Maintenance Manual – Viron P300 Pool Pump
5