Installation Instructions; Explanation Of Warning Symbols; Safety Precautions - Leviton MDNCT-2SC Manual Del Usuario E Instalación

3

INSTALLATION INSTRUCTIONS

The following section contains wiring instructions for the mini meter OEM module. The
mini meter module must be installed in an appropriate UL listed enclosure.
The mini meter must be installed by a licensed electrician.
If technical assistance is required at any point during the installation, contact information
can be found at the end of this manual. Leviton is not responsible for damage to the meter
caused by incorrect wiring.
3.1

Explanation of Warning Symbols

Indicates the need to consult the operation manual due to the presence of
a potential risk. Follow safe electrical work practices. See NFPA 70E in the
USA, or applicable local codes.
Indicates the presence of electric shock hazards. Prior to proceeding,
de-energize the circuit and consult the operation manual.
3.2

Safety Precautions

WARNING
• WARNING: TO AVOID FIRE, SHOCK OR DEATH; turn off all power supplying the
equipment before performing any wiring operations. Use a properly rated voltage
sensing device to confirm that power is off.
• Failure to follow these warnings could result in serious injury or death.
• Installation of electric meters requires working with possibly hazardous voltages.
These instructions are meant to be a supplement to aid trained, qualified professionals.
• Installations should be done in accordance with local codes and current National
Electric Code requirements.
• Equipment used in a manner not specified by this document impairs the protection
provided by the equipment.
A qualified person is one who has skills and knowledge related to the construction and
operation of this electrical equipment and the installation, and has received safety training to
recognize and avoid the hazards involved. No responsibility is assumed by Leviton for any
consequences arising out of the use of this material.
3