Hydraulic Diagram; Installation Of The Equipment; Unpacking The Equipment - Wasserlab Micromatic DA Manual Del Usuario

6. Hydraulic diagram

Feed Water
1
1. Pretreatment cartridge
2. Pretreatment cartridge
3. Deionisation resin cartridge
4. Deionisation resin cartridge
5. Low pressure switch
6. Solenoid valve
7. Reverse Osmosis Membrane (ROM)
8. Conductivity sensor
9. Type II water tank
10. Level pressure switch

7. Installation of the equipment

7.1 Unpacking the equipment

- Check that the packaging does not present any kind of
damage.
- Carefully unpack the equipment and components. Note
if any component is damaged.
- Check that no element of the system is missing:
Micromatic equipment.
Tank level tube
Transformer
Spanner wrench
Pipe cutter
1 set of pretreatment cartridges [1] and [2].
1 set of interchangeable resin cartridges [3] [4]
User Manual
Water inlet and drainage connection kit.
The equipment is self-supporting.
equipment pick it up from the sides of the base. Note the
following guidelines to locate and connect your equipment:
5
6
2
Rechazo
To handle the
3
7
8
4
TANK
9
Type II Water
10