Wasserlab Micromatic DA Manual Del Usuario página 25

8. MONITORING
The equipment screen displays the operating status and the corresponding values by means of icons.
Equipment status
Standby
Production
8.1 Symbols and meaning:
OT
Numeric value of the measurement
Screen
The screen displays the conductivity value of the water produced.
Full tank icon
Displays the conductivity value of the water being produced and sent to the tank.
The icons: Equipment in Operation, Electrovalve, Tank full, are activated.
Pre-treatment change
Deionisation Resin change
Water cut off
Conductivity probe not working
Notify the technical service
OT equipment setup: Equipment with
open tank
Equipment in operation
Tank full
inlet electrovalve open
Adjustment Menu
Temperature settings
Calibration Menu
Set the hour meter to 0
RESET
Hour meter
Conductivity measurement
µS/cm