Montaje / Mounting
Realizar los agujeros para amarrar la regla.
Los agujeros de los pasadores se realizarán
más tarde.
El área marcada estará libre de pintura.
Montar los módulos de la regla y alinearlos.
Utilizar el calzo separador de 4 mm entre módulos.
(A) Arandela y tornillo M6 especiales (consultar con Fagor) Pa = 8 Nm
Make the holes to secure the scale.
The holes for the dowel pins will be made
later.
The marked area must be free of paint.
F MODULAR - v1706 - página / page 5/13
Quitar las tapas. La cinta protectora se pue-
de mantener durante el montaje y unión de
los módulos. Se deberá quitar para introducir
los labios.
Mount the scale modules and lign them up.
Use the 4 mm separator wedge between modules.
(A) Special washer and M6 bolt (check with Fagor) Pa = 8 Nm
Remove the end caps. The modules can be
installed with the protective tape but it has to
be removed before inserting the sealing lips.
(A)