Quick BX 16 Manual Del Usuario página 15

Calentador inox
Ocultar thumbs Ver también para BX 16:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

POS.
DESCRIPTION
1
Water Tank
2
Tank mounting
3
Tank mounting
4
Tank mounting
5
Tank mounting
6
Red plastic washer
7
White plastic washer
8
Blue plastic washer
9
Relief / non return valve
10
Hose clamp
11
Pipe
12
Electric element gasket
13A
Electric element
1200W 220V
13B
Electric element
500W 220V
13C
Electric element
1200W 110V
13D
Electric element
600W 110V
14
Double thermostat
15
Plastic spacing bar
16
Cap
17
Screw
18
Nuts
19
Ground cable terminal
20
Washer
BOILER BX16 - REV004A
CODE
MLB160000000
MBFPGX700300
MBFPGX720300
MBFPNX395300
• shut down power supply.
MBFPNX400300
PECRBLRS0000
• Remove the protection cover (16) in order to reach the
PECRBLBNC000
thermostat (14).
PECRBLBL0000
• Adjust the thermostat knob with a screwdriver (fig. 4)
MNVALS12S68P
adjust the thermostat to its max temperature.
PBF25100W000
• Push the reset button on the double thermostat (fig. 4).
PVTBGM5NT030
• Re-adjust the thermostat knob with a screwdriver
PGGRES000000
(fig. 4) and turn it until the required temperature.
• Replace on the protection cover (16).
EVR122200000
• Switch on power supply.
EVR052200000
EVR121100000
EVR061100000
EVT15S000000
PBTE25H6FMF0
F
PCCPLT600000
MBV0306MXCE0
MBD04MXEN000
EJCY04000000
MBR04X000000
The overpressure release device must be activated regu-
larly to remove calcium deposits and to ensure that it is
not blocked.
Periodically check the joints of the water pipe instal-
lation; check the tightness of the securing screws and
replace them in case they are worn or corroded.
Also periodically check the electrical system working
order.
MAINTENANCE
WARNING: Quick
®
nautic water heaters are pro-
vided with a double thermostat with manual
reset that shuts down power supply in case of an
excessive water temperature.
If it happens, follow the instructions below:
WARNING: if the high temperature safety system
switches on repeatedly, call Quick
center.
MAINTENANCE
During wintertime, when the water heater is not
in use it should be drained using the lever of the
valve (9). This is to avoid serious damage caused
by freezing.
GB
®
service
15

Publicidad

Tabla de contenido
loading

Tabla de contenido