Dmx Address Setting; Cleaning & Maintenance - TECshow Nebula FX 3-in-1 Manual De Usuario

7. DMX Address Setting

Each fixture must set a specific starting address. When re-
ceiving signal, fixture will receive channel control signals
of this address from the DMX controller.
- For easy to use, the user can set the same ad-
dress for several fixtures, also can set up a u-
nique address for every device.
- If you set the same address for all fixtures, all
the fixtures will receive from the same DMX chan
nels signal. All connecting fixtures are jointly con-
trolled, but it can't separately control a device.
- If you set a di erent address for each fixture, each
fixture will receive unique signal and can be con-
trolled by DMX controller separately.
- This fixture has 34 channels.you should set the
starting address of the first unit to 1, the second
unit to 35 (1*34 + 1), the third unit to 69 (2*34+ 1),
and so on.
P. 12
NEBULA FX 3 IN ONE
ENGLISH VERSION
8. Cleaning & Maintenance
Cleaning should be performed every 15-day period, by us-
ing a sponge which is dipped with alcohol, rather than wet
cloth or other chemical liquid, to clean the mirror.
Cut o power before cleaning and maintenance!