Dmx Address Setting - TECshow SATURN Manual De Usuario

10. DMX ADDRESS SETTING

Each fixture must have a specific starting address.
When receiving signal transmission, fixture will
receive channel control signals from DMX controller
through this starting address.
According to different requirements or easy to use,
the user can set many fixtures to the same address,
also can set up a separately address for every
device.
If more than one fixtures have the same address, all
of them receive the same DMX channel signal from
DMX controller. All connected fixtures are jointly
controlled, DMX controller can't control a device
Address 47
separately.
If each device has a different address, each de-
vice will be separate and accept separate DMX512
control signal through the separate DMX address,
so that more convenient to control one device
separately. this method must be based on channel
quantity of device to determine a starting address.
This device has 23 channels, so the first device
starting address set 1, the second is 24(1+23), the
third is 47(24+23) and so on.
Address 24 Address 01
English version | Tecshow Saturn
P. 17