Holder Remote Controller; System Test - Webasto Cool Top Trail 35 Instrucciones De Funcionamiento E Instalación

2
Fig. 20: Fixing the air distributor to the ceiling
4.13 Holder remote control
2
Fig. 21: Holder remote control

4.14 System test

Cool Top Trail 35
1
2 Fix the air distributor (1) to the ceiling using 4 coun-
X
tersunk head screws (3).
3
Insert the air filters (2) in the air distributor.
X
Install the holder (1) for the remote control in a con-
X
venient location, using 2 countersunk screws (2).
1
Test all air conditioner functions as described in
X
chapter 5.
Ensure that the condensate outlets are clear after in-
X
stalling the outdoor unit.
Enter the new vehicle height and weight in the vehi-
X
cle documents if required.
Hand this manual over to the vehicle owner.
X
NOTE
This step is optional. The purpose of these
screws is only to close a potential gap be-
tween the air distributor and the ceiling of
the vehicle.
14