Installation Of The Air Distributor Assembly - Webasto Cool Top Trail 35 Instrucciones De Funcionamiento E Instalación

4.12 Installation of the air distributor assembly

2
Fig. 16: Removing the air filters
Fig. 17: Connecting air distributor - and outdoor unit
cables
Fig. 18: Attaching the air distributor assembly to the
mounting bracket
Fig. 19: Fixing air distributor assembly to the mounting
bracket
Cool Top Trail 35
Pull out the air filters (2) from the air distributor (1).
X
1 2
Connect the socket and plug of the air distributor -
X
and the outdoor unit cable.
– Ensure that the colours of the wires match: yellow
to yellow, red to red, etc.
Attach the air distributor (3) to the air distributor
X
mounting bracket (1) by engaging the two parts.
– You will hear four clicks of the latches (2) as the
1
parts connect together.
2
3
Fix the air distributor (1) on the air distributor
X
mounting bracket with four ST4.2*19 pan head
screws (2).
1
2
13