HEINE EN200 BP Manual Del Usuario página 53

•
Position the blood pressure measurement
cuff on the left arm.
•
A note on the screen asks you to
double-check the position and size
of the blood pressure cuff.
•
Confirm this screen and perform
the measurement by pressing the
buttons .
•
The EN200 BP automatically slowly
inflates the cuff to measure the blood
pressure. The pressure display
changes constantly during inflation.
•
The device inflates the cuff until an
adequate pressure for the measurement
is reached. The device then slowly
releases the air from the cuff and
performs the measurement. The blinking
-symbol represents the pulse.
•
You can terminate the measurement
at any time by pressing the
•
Use a stethoscope to determine the value
for the SYSTOLE and save this in the
display by tapping the
•
The reading is shown in the display.
MED 113275
-button.
-button.
2017-05-02
53/176