Code Retrieval; Quick Code Reference - One for All OARC05G Guia Del Usuario

PVRs, DVRs) These keys operate the transport functions
(play, fast-forward, rewind, etc.) of your device. To prevent
accidental recording, the
twice to start recording.
In TV mode the
on your TV), and the
and the Picture-In-Picture.
FORMAT This key provides you the (16:9) wide screen view
function (if available on your original remote).

Code Retrieval

The code retrieval feature allows you to find out which code is
currently programmed for each device key. This is useful if you
used the Search Method to program a device key.
1. Press the device key once.
2. Press and hold down the SET key until the
blinks twice (the key blinks once, then twice).
3. Press 9 9 0. The
4. For the first digit of your five-digit code, press 1 and count
all the blinks. If there are no blinks, the digit is "0".
5. For the second digit, press 2 and count all the blinks. If
there are no blinks, the digit is "0".
6. For the third digit, press 3 and count all the blinks. If there
are no blinks, the digit is "0".
7. For the fourth digit, press 4 and count all the blinks. If there
are no blinks, the digit is "0".
8. For the fifth digit, press 5 and count all the blinks. If there
are no blinks, the digit is "0". Now you have your five-digit
code.

Quick Code Reference

Device Type
6
(transport keys for DVDs, VCRs,
(RECORD) key must be pressed
key activates Picture-In-Picture (if available
key swaps between the main picture
(power) key blinks twice.
Code
(power) key