UFESA SC8397 Manual De Instrucciones página 10

CLEANING AIR INLET COVER
1
Remove the air inlet (2) by turning it counter-
clockwise.
● Clean the air inlet and wipe it with a dry or slightly
damp cloth.
2
Replace the air inlet cover (2) that three latches
located on the air inlet cover hit the holes on the body
of the dryer.
3
Turn the air inlet cover (2) clockwise.
STORAGE
● If your hair dryer is not in use, always unplug the
power cord from the electrical outlet.
● After use wait till the hair dryer cools down and
place it in a dry, cold and unavailable to children place.
● Never turn the cord around hair dryer as it causes
the risk of premature wear risk of cord damage.
In order to ensure its long lasting operation the cord
is to handled with care, avoiding tugging, twisting or
pulling, especially when unplugging. If the cord gets
twisted during operation it should be straightened from
time to time.
Disposal
Dispose of packaging in an environmentally-friendly
manner. Our goods come in optimised packaging.
This basically consists in using non-contaminating
materials which should be handed over to the local
waste disposal service as secondary raw materials.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning
used electrical and electronic appliances
(waste electrical and electronic equipment
– WEEE). The guideline determines the framework for
the return and recycling of used appliances as applicable
throughout the EU. Please ask your specialist retailer
about current disposal facilities.
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper handling.
The manufacturer reserves his rights to modify the product any
time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.
B