Date/Time Setting - Olympus E-500 Manual De Instrucciones

Date/time setting

Date and time information is recorded on the card together with the images.
The file No. is also included with the date and time information. Be sure to set
the correct date and time before using the camera.
1
Press the MENU button.
2
Use ac to select [
Use ac to select [X], then press
d.
3
Use ac to select one of the
following date formats: Y-M-D (Year/
Month/Day), M-D-Y (Month/Day/Year),
D-M-Y (Day/Month/Year). Then press
d.
• The following steps show the procedure
used when the date and time settings are
set to Y-M-D.
4
Use ac to set the year, then press d
to move to the month setting.
• To return to the previous setting, press d .
• The first two digits of the year are fixed.
5
Repeat this procedure until the date
and time are completely set.
• The time is displayed in the 24-hour
format. For example, 2 p.m. will be
displayed as 14:00.
6
Press the i button.
• For a more accurate setting, press i
when the time signal hits 00 seconds. The
clock starts when you press the button.
• The date and time settings will be returned to the factory default settings if the
camera is left without the battery for approximately 1 day. The settings will be
canceled more quickly if the battery was only loaded in the camera for a short time
before being removed. Before taking important pictures, check that the date and
time settings are correct.
] , then press d.
MENU button
Notes
i
button
En
21