Setting The Date And Time - Olympus CAMEDIA C-300 ZOOM Manual Básico

SETTING THE DATE AND TIME

1
Open the lens barrier fully.
2
Press .
The shooting mode top menu is displayed.
3
Press on the arrow pad to select MODE MENU.
4
Press to select the SETUP tab, then press
5
Press
The green frame moves to the selected item.
6
Press
Y-M-D (Year/Month/Day)
M-D-Y (Month/Day/Year)
D-M-Y (Day/Month/Year)
Then press
The cursor moves to the next setting field.
7
Press
the next field.
Press to move back to the previous setting field.
The first two digits of the "Y" are fixed.
8
Repeat the above steps until the date and time are completely
set.
9
Press .
For a more accurate setting, press
The clock starts when you press the button.
10
Close the lens barrier.
The camera turns off.
If the camera is left for about 1 hour with the batteries removed, or if the
battery power is exhausted, the date and time settings may be canceled or
become incorrect. Before taking important pictures, check that the date and
time settings are correct.
to select , then press
to select one of the following date formats:
.
to set the first field, then press
.
.
to move to
when the clock hits 00 seconds.
En
En 13