Power On/Off; Date/Time Setting - Olympus C-720 Ultra Zoom Manual Básico

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Power on/off

1
Before turning the camera on, press
the tabs on the lens cap to remove it.
2
Press the power switch to turn the
camera on.
● The lens moves out when the mode
dial is not set to
● The viewfinder turns on.
● To turn the camera off, press the power
switch again.
● If the date/time has been returned to
the factory default setting, "Y/M/D"
appears on the monitor.

Date/time setting

1
Set the mode dial to
the camera.
2
Press
.
● The monitor turns on automatically and the top menu appears.
3
Ñ
Press
on the arrow pad to select
4
When
is selected on the screen, press
format.
● Select any one of the following formats:
D-M-Y (Day/Month/Year)
M-D-Y (Month/Day/Year)
Y-M-D (Year/Month/Day)
● This step and the following steps show the procedure used when the date
and time settings are set to Y-M-D.
5
í
Press
to move to the year (Y) setting.
6
Ññ
Press
to set the year. When the year is set, press
the month (M) setting.
● Repeat this procedure until the date and time are completely set.
● To move back to the previous setting, press
● The first two digits of the year cannot be changed.
7
Press
.
● For a more accurate setting, don't press
The clock starts when you press the button.
8
To turn the camera off, press the POWER switch.
● The lens retracts.
.
, then press the POWER switch to turn on
.
Ññ
to select the date
í
É
.
until the clock hits 00 seconds.
En
Lens cap
to move to
15

Publicidad

Tabla de contenido
loading

Tabla de contenido