Operation - Festo EGSA Instrucciones De Utilizacion

EGSA
7

Operation

Warning
Uncontrolled moving masses can cause injury
to people or damage to property (danger of
fingers being squashed).
S Make sure that:
nobody can place his/her hand in the
positioning range of moving components
(e. g. by means of a protective screen).
there are no objects in the position. range.
It should not be possible to touch the EGSA
until the mass has come to a complete
standstill.
Fitting in a vertical or sloping position
Warning
Uncontrolled moving masses can cause injury
to people or damage to property (danger of
fingers being squashed).
If there is a spindle nut fracture inside the
EGSA or a toothed belt breaks (e. g. due to
wear) when using a parallel mounting kit, the
work mass will fall down.
S Check whether additional external safety
measures against spindle nut fracture are
necessary (e. g. toothed latches or moving
bolts).
S Replace the spindle nut and if necessary
spindle if the permitted axial play is
exceeded.
If the motor turns in the wrong direction:
Please note
The reference position is lost when the motor
is dismantled.
S Start reference travel in accordance with the
chapter Commissioning" in order to
determine the new reference position.
28
Fig. 14
Fig. 15
Festo EGSA 0711NH English