Setting An Oven Function Manually; Setting An Automatic Oven Function - Fulgor Milano FQO 6010 P MT Instrucciones Para La Instalación Y Uso

GB

Setting an oven function manually

Turn the mode knob into the desired position, the clock display shows On for a few
seconds. The oven will work for a maximum time (12hours). Depending on the oven
model, the number and type of available functions can be different.
If the selected function works using any heating elements, the
(it doesn't appear in light and defrost position).
Turn the Temp & Time selector and set the desired oven temperature. The control
offers a PRESET temperature per every cooking mode or a full range between MIN and
MAX to be adjusted by hand. Check the value on the display after having selected the
temperature.
The temperature appears on the clock display for about 5 seconds when the Time &
Temp selector is pushed or when a new function has just been selected.
As soon as the oven starts, the preheat led (indicated by the bars) on the left side of the
clock display starts flashing and becomes steadily on when the preheat ends.
Turn the mode selector to ZERO (OFF) position to stop any activity, the display will show
OFF for a few seconds.

Setting an automatic oven function

After having selected a function as described before, the control can be programmed
in order to set timed cooking activities. The time program remains active even if the
function is changed (exception: pyrolyse). The following possibilities are available:
1 Timed cooking setting the cooking time (duration).
2 Timed cookitng setting the end of cooking time (stop time).
3 Delayed cooking setting duration and stop time.
Push the knob in order to toggle between cooking duration (cook time) and end of
cooking time (stop time): the words "dur" or "End" are displayed respectively.
Turn the knob left/right to edit the duration or the stop time when the proper word is
displayed:
1. When the word dur is displayed, the control shows 30' as the standard cooking
duration. Turn the knob left/right in order to set the actually desired cooking time in a
range between 0 and 240 minutes. The display will flash dur and its value alternatively
for a few seconds then it will show the time of day, the pot symbol and the
to indicate that a timed cooking is active. The end of cooking time is updated
automatically.
2. When the word End is displayed, the control shows the current time as the initial stop
time. In order to set the actually desired end of cooking time in a 24 hours range:
14
symbol is displayed
letter