Dash Disassembly - Metra 99-7353CH Instrucciones De Instalación

Ocultar thumbs Ver también para 99-7353CH:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Unclip and remove the factory
radio trim panel including the a/c
vents. (Figure A)
2. Remove (4) Phillips screws
securing the radio in the dash.
3. Remove (2) Phillips screws
securing the start/stop switch if
equipped. (Figure B)
4. Remove (4) Phillips screws
securing the storage pocket
(Figure B)
(Figure A)

Dash Disassembly

5. Remove the (8) Phillips screws
securing the a/c vents then unclip
and remove them from the radio
trim panel. (Figure B)
6. Unclip and remove the hazard
switch. (Figure B)
7. Remove (3) Phillips screws
securing the passenger air bag
indicator. (Figure B)
Continue to kit preparation
99-7353CH
Step 3
(Figure B)
2
Step 5
Step 6
Step 4
Step 7

Publicidad

Tabla de contenido
loading

Tabla de contenido