Safety Information - HoMedics Deluxe Automatic Arm Manual De Instrucciones

IB-BPA3000-0912-01:Layout 1 09/01/2013 17:43 Page 4

SAFETY INFORMATION

Caution: consult accompanying
documents
CE mark: conforms to essential
requirements of the Medical Device
Directive 93/42/EEC.
Manufacturer
Specifies serial number
CAUTION
• This device is intended for adult use only.
• This device is intended for non-invasive measuring and monitoring of arterial blood pressure. It is not
intended for use on extremities other than the arm.
• Do not confuse self-monitoring with self-diagnosis. This unit allows you to monitor your blood pressure. Do
not begin or end medical treatment based solely on the readings from this unit. Always consult your
physician first.
• If you are taking medication,consult your physician to determine the most appropriate time to measure
your blood pressure. Never change a prescribed medication without consulting your physician.
• This unit is not suitable for continuous monitoring during medical emergencies or operations.
• If the cuff pressure exceeds 40 kPa (300 mmHg), the unit will automatically deflate. Should the cuff not
deflate when pressures exceeds 40 kPa (300 mmHg), detach the cuff from the arm and press the
to stop inflation.
• To avoid measurement errors, carefully read this manual before using the product.
• The equipment is not AP/APG equipment and not suitable for use in the presence of a flammable anesthetic
mixture with air of with oxygen or nitrous oxide.
• The operator shall not touch output of AC adapter and the patient simultaneously.
• To avoid measurement errors, please avoid the condition of strong electromagnetic field radiated
interference signal or electrical fast transient/burst signal when using the AC adaptor.
• The user must check that the equipment functions safely and see that it is in proper working condition
before being used.
Type B applied part
Disposal: do not dispose of this product
as unsorted municipal waste. Collection
of such waste separately for special
treatment is necessary.
Direct current
4
button