Recalling The Records - HoMedics Deluxe Automatic Arm Manual De Instrucciones

IB-BPA3000-0912-01:Layout 1 09/01/2013 17:43 Page 10

Recalling the records

1. Please choose user A or B when the blood pressure monitor is
turned off. Then press the "MEM" to show the average of the
records you have taken. The sign of "AVG will show in the right
corner.
2. Press the "MEM" or "SET" to get the record
you want.
The order of the record, date, time will
display alternately.
CAUTION
The most recent record (1) is shown first. Each new measurement is assigned to the first (1) record. All other
records are pushed back one digit (e.g., 2 becomes 3, and so on), and the last record (60) is dropped from the
list.
Deleting your records
If you did not get the correct measurement, you can
delete all results using the following steps.
1. Please choose user A or B when the blood
pressure monitor is turned off, press and hold
"MEM" for 3 seconds and the flash display will
show dEL ALL.
2. Press "SET" to confirm deleting and the monitor
will turn off automatically.
3. If you don't want to delete the records, press
to escape.
4. If there is no record the right display will show.
UP
DOWN
The current record The month and day
and total number of
records.
10
The corresponding
time will show and
alternate with date.