Locate The Setup Form; Set The Administrative Password; Set Up The Network For Windows Systems - Oki MC361 Guia De Instalacion

Locate the Setup Form

You will find a Setup Form on page 54. You can
use this form to record needed information about
your network settings, then refer to it when
setting up the machine for network operation.
Set the Administrative
Password
Note
When using the arrow keys to make your
selections, press the key repetitively to go to the
selection.
1 Press <Setting> on the control panel.
2 Use the down arrow key to select [Admin
Setup], then press <OK>.
3 Use the down arrow key to select [a], then
press <OK> six times to enter the default
password: aaaaaa.
4 Use the arrow keys to select [Enter] on the
display, then press <OK>.
5 Use the up arrow key to select
[Management], then press <OK>.
6 Use the up arrow key to select [Admin
Password], then press <OK>.
7 Use the arrow keys to select the digits of your
password, pressing <OK> after each digit.
8 When done entering your new password, use
the arrow keys to select Enter on the display,
then press <OK>.
Note
The Admin Password must have at least six digits
and is case sensitive.
9 When you have entered all the digits, use the
arrow keys to select [Enter] on the display,
then press <OK>.
10 Use the left arrow key to back out to the main
screen.
11 Enter the Admin Password on line A-1 of the
Setup Form.
Set Up the Network for
Windows Systems
To complete the network connection with a
Windows computer, first set IP addresses for the
computer and the machine, and then install
printer driver(s) on the computer.
22 - English