Profiles For Scan To Network Pc; Creating A Profile; Modifying A Profile - Oki MC361 Guia De Instalacion

15 Create a profile to complete the setup for
Scan To Network PC. See "Profiles for Scan To
Network PC" on page 38.
Profiles for Scan To Network
PC
Register the information you configured on the
computer as a profile. This is necessary when you
perform Scan To Network PC with the computer.

Creating a Profile

Note
When using the arrow keys, press the key
repetitively to go to the selection.
1 Press the <SETTING> key on the control
panel.
2 Use the down arrow key to select [Profile],
then press <OK>.
3 Use the down arrow key to select the profile
number you want to register, then press
.
<OK>
4 Use the down arrow key to select [Edit], then
press <OK>.
5 Use the down arrow key to select the profile
number you want to register, then press
<OK>.
6 Use the down arrow key to select [Profile
Name], then press <OK>.
7 Enter the information from line C-4 of the
Setup Form.
8 Use the arrow keys to select [Enter], then
press <OK>.
9 Use the down arrow key to select [Target
URL], then press <OK>.
10 Enter the value from lines C-1 and C-5 of the
Setup Form as "\\C-1\C-5"; e.g.,
\\PC1\SalesDev.
11 Use the arrow keys to select [Enter], then
press <OK>.
12 Use the down arrow key to select [User
Name], then press <OK>.
13 Enter the information from line C-2 of the
Setup Form.
If domain management is done, enter
"C-2@domain name".
14 Use the arrow keys to select [Enter], then
press <OK>.
15 Use the down arrow key to select [Password],
then press <OK>.
16 Enter the information from line C-3 of the
Setup Form.
17 Use the arrow keys to select [Enter], then
press <OK>.
18 Use the down arrow key to select [File Name]
and then press <OK>.
19 Enter the information on line C-6 on the Setup
Form. You can enter up to 64 characters.
By adding "#n" to the end of the file name, a
serial number is automatically assigned to the
end of the name of sent files.
By adding "#d" to the end of the file name, a
date is automatically assigned to the end of
the name of sent files.
20 Use the arrow keys to select [Enter], then
press <OK>.
21 Configure other items if necessary.
22 Press
<OK>
The setup for Scan To Network PC is complete.
For details how to use Scan To Network PC, see
the online Basic User Guide on the DVD supplied
with your machine.

Modifying a Profile

Note
When using the arrow keys, press the key
repetitively to go to the selection.
1 Press the <SETTING> key on the control
panel.
2 Use the down arrow key to select [Profile] and
then press <OK>.
3 Use the down arrow key to select [Edit] and
then press <OK>.
4 Use the down arrow key to select the profile
you want to modify, then press <OK> .
38 - English
to register the settings.